想要更直观地了解软管泵混凝土抛丸机准时交付产品吗？？产品视频，带你走进产品世界
以下是:黑龙江大兴安岭软管泵混凝土抛丸机准时交付的图文介绍
软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.
软管泵采用外装动、静环式机械密封，可直接水冲洗，耐高压，不易磨损，无泄漏。 体积小，流量大，扬程压力高，适用长距离与高阻力定量输送。 <br />
泵的叶轮与传动齿轮分开，且在泵腔内各零配件之间保证一定的间隙，相互不接触，无磨损，低噪音，可靠性好，使用寿命长，节能降耗。<br />
配置变频器后，可以随意调节流量，并可做一般计量泵使用。
软管泵原理：
软管泵是在钻探过程中，向钻孔输送泥浆或水等冲洗液的机械。软管泵是钻探机械设备的重要组成部分。它的主要作用是在钻进过程中将泥浆随钻头钻进注入井下，起着冷却钻头，清洗钻具、固着井壁、驱动钻进，并将打钻后岩屑带回地面的作用。在常用的正循环钻探中?软管泵是将地表冲洗介质─清水/泥浆或聚合物冲洗液在一定的压力下，经过高压软管水龙头及钻杆柱中心孔直送钻头的底端，以达到冷却钻头将切削下来的岩屑并输送到地表的目的。常用的软管泵是活塞式或柱塞式的。由动力机带动泵的曲轴回转曲轴通过十字头再带动活塞或柱塞在泵缸中做往复运动。在吸入和排出阀的交替作用下实现压送与循环冲洗液的目的。
豫信致诚机械设备(大兴安岭市分公司)是一家专业性 工业软管泵公司，本公司坐落于黑龙江大兴安岭,主要加工，制作，销售各种 工业软管泵，是一家实力型的生产经营性企业。目前公司拥有员工130余人，技术力量雄厚，设备，价格合理。集设计、制作、运输、安装、售后跟踪于一体的 服务体系将免除您的后顾之忧。，我们会给您热情的服务，您会发现，您选择的不仅是 工业软管泵产品，还是一个有实力，讲究诚信的合作伙伴！
众所周知软管泵在运行时，是通过一根U型附有弹性的橡胶软管来完成输送。今天小编需要强调的是，软管存放时间不宜过长，一般以一年为限。在停工期间，对装有软管的泵，若长期不用，每隔一个月需转动泵一次。以免压辊长时间压在泵管的某一处，减弱管子回弹性，影响其流量的输送。
It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.
扫一扫
